
Installation
Garage door
installation
A new garage door changes how the whole front of your house looks — and it has to work every single day. We take out the old door, install the new one square and level, set the springs and balance, and test it top to bottom before we call it done.
Signs it’s time
Panels are dented, cracked, rusted or warped
You’re repairing the same door over and over
The door is heavy, drafty or noisy no matter what
You want a better look for the front of your home
Repair
Garage door repair
When a door sticks, slams, sags or jumps its track, something specific is wrong. We track down the actual cause — cables, rollers, hinges, tracks, springs or the opener — explain it plainly, and fix it right.
Signs you need it
The door won’t open or close all the way
It hangs crooked or one side moves before the other
A cable is frayed or loose, or a roller has come out of the track
Grinding, popping or banging when it moves


Tune-ups
Tune-ups
A tune-up gets a tired door running smooth again. We check the balance and spring tension, tighten hardware, adjust the tracks and the opener’s travel and force settings, and test the safety reverse.
Signs you need it
The door is louder or slower than it used to be
It shudders, jerks or drifts down when you let go
The opener strains or reverses for no clear reason
It’s been a while since anyone looked at it
Preventative maintenance
Preventative maintenance
Most garage door breakdowns build up slowly. Regular maintenance — lubricating rollers, hinges and bearings, checking cables and springs for wear, and catching loose hardware early — keeps small problems from turning into a door that won’t open.
Good fit if
Your garage is the main way in and out of the house
The door gets opened many times a day
Rollers and hinges look dry, rusty or worn
You’d rather plan for upkeep than deal with a surprise


Springs
Spring replacement
Springs do the heavy lifting — your opener just guides the door. When one breaks, the door gets very heavy and may not open at all. We replace torsion and extension springs with the right size for your door, then set the tension and check the balance.
Signs you need it
You heard a loud bang from the garage
There’s a visible gap in the spring above the door
The door only lifts a few inches, or feels extremely heavy
Cables are hanging loose at the sides
A word on springs: please don’t DIY them.
Torsion springs are wound under very high tension. Trying to adjust, unwind or replace one without the right tools and training can cause serious injury.
​
If you think a spring is broken, leave the door closed, don’t keep running the opener, and give us a call.
Openers
Opener repair & installation
If the opener runs but the door doesn’t move, reverses for no reason, or just quit, we’ll figure out whether it’s worth repairing. If it’s time for a new one, we’ll install it, set the limits and safety sensors, and make sure your remotes and wall button work.
Signs you need it
The motor hums or clicks but the door doesn’t move
The door starts closing, then reverses back up
Remotes or the wall button work only sometimes
The opener is old, loud or getting unreliable

Tap Book Online on any page to pick a time through our online booking, or call (979) 243-6943. We’ll confirm the visit with you.
Bryan, College Station and the surrounding Brazos Valley. If you’re nearby and not sure, just call and ask.
A few safe things to check:
-
Is the opener plugged in, and is the breaker on?
-
Try the wall button — if that works, the remote may need new batteries.
-
Make sure the door’s manual lock isn’t engaged.
-
Look at the two safety sensors near the floor: clean the lenses and make sure nothing is blocking them.
If you heard a loud bang, see a gap in the spring above the door, or a cable is hanging loose, stop there — don’t keep trying the opener. Give us a call.
-
A common rule of thumb is a tune-up about once a year, and more often if your door gets heavy daily use. In between, pay attention to new noises, jerky movement or a door that feels heavier than it used to — those are your cue to have it looked at.
We strongly recommend you don’t. Torsion springs are under high tension and can cause serious injury if they’re handled without the right tools and training. Leave the door closed and call us.


